What kind of underdive pulley u got on it???

DUDE THAT IS SICK. I DRIVE A MUSTANG BUT LS-1'S ARE GODS OF MOTORS.. AND WOW ON THE RPM'S

the main reason that i put this vid up is to show you guys that i reve my car out to 6500 with the cam. not how fast the speedo is moving.

i dont tnink i said it clearly the dyno does not have a streat load it is a heavy load or lite load depends on the car for example if you took my speedo and pit it in a civic on this dyno the guadges would move the same speed as they do hear but the dyno would have a light load to hold the civic. if you had a 1000 whp c6 gues what the gadges would move the same but the dyno would be under a vary heavy load thats how this dyno works how much it has to hold back a dyno jet has a 4500lb drom under ground and its how fast the car can push the drum so in that case yes the speed would varey. and no my car is not that fast on the street i have a vid that shows the speedo clime on the street wathc that one and you will see the difference. would be cool to have an ss that dam fast. you would never do it cam only.

there is no wind resistance on a dyno which plays a large factor when racing. This is why the speedo goes up so fast.

thanks for the information :)

the cam spec are 232/234 595/598 112 lsa you can fined it on www.ws6store.com the add of the cam and an underdrive pulley made 58 hp gaine and i love the driveabilty of the car its almost like stock just have to through a little more clutch at it from the get go but over all love the cam it makes power from like 2000 rpm and up it likes to be crused at around 2500 rpm but if you did this cam i would recomond at least 373 gears im runing 390s

What cam you put?i want do this for my ss

nice man

the dyno does put a load that is heaver than a dyno jed but the car will make the pull the same as stock cars will the dino reads hp by how much it has to hold the car back as far as i know its vary acurate the car pulled 331 whp stock