very CoOoOoL

you cool ,nice

Thanks Chuck.

Try a lower temp thermostat and run a coolant/water mixture that is slightly less coolant and more water(less like 50/50 and more like 40% coolant and 60% water) since you have to burp the system again to fit a new thermostat. The best way to refill/burp a coolant system is to pull a vacuum on the whole system (the hoses will actually collapse) and this will pull all of the air out. Then hook a container full of 40/60 coolant mix up to the system and release the vacuum. It will pull coolant through the whole system with no air in it. Snap-on, Matco, etc. all make tools for this purpose. Good luck and keep the vids coming!

Good luck on the heat problem

I did the Roe front Fascia kit and just trying to get the system burped right (WHICH IS FUN on GEN Is)I am trying to find out what the next step is.

have you tried larger fans? do they make and electric waterpump for vipers? lower thermostat?

What have you done so far to try to solve your overheating problem? Maybe I can help, I used to be a Viper Tech in Arizona, talk about overheating!

I wish I knew what was going on with my Overheating. Looking into possible solutions such as a larger radiator.Although I have already put a lot of time and a bit of money into the problem. It's getting frustraiting.

whats up with your overheating man? need a larger radiator?