Uploaded Favorites Comments
123
image
Roll Racing-18 Shelby gt500, C6 Z06s, Evo, Supras, Sti, Foxbodys, Z31 300ZX, Cobras, Fbodys, DSM ...
From: PhoenixEvo
24,416 views
score (+108)
180 comments
October 24, 2008
Looks like you guys are still running a good show out there. I really need to put some cash aside and finish this 408. Anybody wanna give me a free 80mm?
 
image
Roll Racing-10 Turbo M3, T61Evo, 35R K20 Integra, Turbo Cobra, Procharged LS1, Pullied Cobra, T67...
From: PhoenixEvo
27,508 views
score (+102)
99 comments
May 20, 2008
I raced the integra on pump to get rid of some gas, and then I had a fuel pump relay fry on me before we could race with me on high boost, and race gas. We were looking forward to that run, but because I was down for the night you all will just have to wait till the next time we both meet.
 
 
That was a very frustrating night for me lol.
 
image
Roll Racing-8 T71 Supra, T70 Cobra,331 w/175 foxbody, GT35r Evo, TSR70 Wrx, T61 Evo, Pullied Cobr...
From: PhoenixEvo
16,961 views
score (+72)
79 comments
May 13, 2008
its to hot in Ethiopia, and the flies were everywhere. I say we go to the UK next time.
 
 
I dont have the fuel to pump the boost anymore on the cobra. If I had fuel it would be a 650-700 rwhp car easy.
 
 
Glad this video finally came out! Long time comming
 
image
My 93 Cobra pre summer video
From: 93cobra
3,195 views
score (+6)
13 comments
April 13, 2008
When I bought the car it was trashed. Bad engine, tranny, rear end, wiring. I have been putting it back together for some time now. I run into a gremlin every once in a while, but they are all small things now.
 
 
No I havent. Kinda hard to find a completely stock fox nowadays.
 
 
intake is called a downs for upper (kinda hard to search for). They have very reasonable numbers up top, and thats one of the reasons I got it. I wont be changing the stock rims. Kinda hard to have a cobra, and not have the turbine wheels. If they ever made a 5 lug cobra replica I would buy it and change to 5 lug though.
 
 
I pulled top end on both, but traffic forced us to slow down.
 
 
I was wondering when somebody was gonna notice that lol.
 
image
Roll Racing-6 Turbo Gto, Turbo Cobra, 300ZX TT, Corvette, T61 Evolution, Cbr 600RR, Yamaha r6, TS...
From: PhoenixEvo
18,172 views
score (+51)
60 comments
April 10, 2008
Totally awesome video! me and Kraus need to get a clean run in, oh and liveinabox with his new tune needs to see my race gas!!!
 
image
Roll Racing-5 TurboCobra, Supra, Corvettes, 300zx, Z28s, Wrx, Gto
From: PhoenixEvo
28,121 views
score (+40)
43 comments
March 23, 2008
it has way more than 42 lb injectors. cause all they handle is 500 whp, and about the same for a 255 walbro forced induction pump, unless its inline like the t-rex. I have 42 lb injectors, afr 185 heads, and low compression built block. Thats the rest of the stuff is all supporting mods. You can ask anyone that rides in my car its dipping 10.5 afr, and lower. ITs a really safe tune cause murillo wasnt too happy with the top end, (breaking up a lil). So he put me on a safe tune, and that turned out to be 450 at 8.5 psi. I am overall very happy with the setup, but will be looking forward to a Precision 76gts in the near future with my new fuel system, and some 60lb injectors. I wont be happy till I have a very streetable 650 hp. And that should be acomplished somewhere around 15 psi.
 
 
OK pulled up the article, and he has very advanced fuel system, very ported trickflow heads, a much more agressive lunati turbo cam, and a very good intake, and at 10 psi still only made 607 hp at the wheel, and most minds believe this is a inflated number. I could easily make 500 at the wheel at 8.5 psi, so there is nothing wrong with my system, and your numbers were obviously skewed. They are remarkable numbers none the less. But 675 at 10 psi on a 67 mm turbo and stock rotating assembly is impossible. Please check your numbers before posting crap like that.
 
 
I dont doubt a stock 5.0 block with heads cam intake made 650 hp, but it wasnt at the wheels, it wasnt at 10 psi, or it wasnt a 67 mm holset hybrid. The turbo map just says it wont do it. I would have no doubt they did it with nitrous though. a 50 shot goes a very long way on a turbo car.
 
 
I should clarify... Any bone stock 5.0 with intake mods making 650 hp at 10 psi is impossible. Turbo map of the holset hybrids that hps uses says it wont flow enough air to make that much hp through those heads at 10 psi.
 
 
My car was on a safe tune for 8.5 psi and that made 450 hp. on that same tune I put C12, and added the boost up to 10 psi. SHould be somewhere round 500ish. As for any mustang making 650 hp on 10 psi out of a 67 mm turbo, thats physically impossible without nitrous. So dont talk out of your ass. Thanks again for the vid man they are always a treat.
 
image
Roll Racing-3 Supras, TurboCobra, Vettes, Z28s
From: PhoenixEvo
8,372 views
score (+16)
19 comments
March 14, 2008
Wait for the next video. I bumped it up to 10 psi, and had some c12 running. Quite a different car at that point
 
 
Those supras are quick! I never noticed the rape switch! Nice
 
image
Roll Racing-1 Saleen, Supra, Z06s, R6, Cobra, TTGto, Wrx, Evo, Foxbody, T/A, Frc C5, Camaro
From: PhoenixEvo
6,723 views
score (+23)
14 comments
March 06, 2008
Great Vids
 
123